STM CircleOS forum / STM32F030k6 device issue

abilash · 2014-05-31 06:01:04

In this device(STM32F030K6), CLK & DIO signals for SWD are in portA (PA13&PA14). But unknowingly I have changed the default settings of portA(PA13-dio, PA14-clk) and flashed the program. so I want to erase the flash memory through USART after by BOOT0=1 & BOOT1=0(for access system memory).

Help me how to do program(like program format, initialization,etc) in Hyperterminal for USART communication or give me any example program or refer me any docs for this.

Last edited by abilash (2014-05-31 07:05:42)

abilash · 2014-06-02 04:57:08

I got to know about Flash loader demonstrator in order to erase my flash data. But it is showing the following error message,

"No response from the target, the boot loader cannot be started."

Though I have made BOOT=1, it is showing the same error. Help me how to solve this issue soon?

# 1 2014-05-31 06:01:04 STM32F030k6 device issue

STM32F030k6 device issue

# 2 2014-06-02 04:57:08 STM32F030k6 device issue

Re: STM32F030k6 device issue

Board footer