STM CircleOS forum / "Build failed": But it didn't!

Rayman · 2008-04-09 18:40:14

I'm new to this... I spend a few hours trying to get RLink working on my Vista-64 machine and gave up... Now, I'm working with a WindowsXP laptop.

I've installed from the CD that came with the STM32Primer and the latest CD image. Everything looks OK until I build...

I always get a "Build failed" message at the bottom of the build log... But, it does actually generate a new .o file and I can run "add_to_circle.bat" and load it up on the device.

Any idea what's going on?

Here's an example build log:

Code:

----------------Build Started: 'toggle_with_CircleOS' in configuration 'Circle_Debug'-------------------------- 
  
Building C:\Raisonance\toggle_with_CircleOS\src\toggle_with_CircleOS.c 
 Running : GCC 
 \"C:\Program Files\Raisonance\Ride\arm-gcc\bin\arm-none-eabi-gcc.exe" -MD -D_STM32F103RBT6_ -D_STM3x_ -D_STM32x_ -mthumb   -mcpu=cortex-m3 "C:\Raisonance\toggle_with_CircleOS\src\toggle_with_CircleOS.c" -o "C:\Raisonance\toggle_with_CircleOS\objdebug\toggle_with_CircleOS.o" -I "." -I "C:\Program Files\Raisonance\Ride\Lib\ARM\include" -I "./src" -c     -fsigned-char  -g          -ffunction-sections        -mlittle-endian 
 \"C:\Program Files\Raisonance\Ride\Bin\rexrdr.exe" "C:\Raisonance\toggle_with_CircleOS\objdebug\toggle_with_CircleOS.lst" 0 "C:\Program Files\Raisonance\Ride\arm-gcc\bin\arm-none-eabi-objdump.exe" --disassemble -all --source "C:\Raisonance\toggle_with_CircleOS\objdebug\toggle_with_CircleOS.o" 
 \"C:\Program Files\Raisonance\Ride\Bin\rexrdr.exe" "C:\Raisonance\toggle_with_CircleOS\objdebug\toggle_with_CircleOS.o.sizetmp" 0 "C:\Program Files\Raisonance\Ride\arm-gcc\bin\arm-none-eabi-size.exe" "C:\Raisonance\toggle_with_CircleOS\objdebug\toggle_with_CircleOS.o" 
  
Building C:\Raisonance\toggle_with_CircleOS\toggle_with_CircleOS.rapp 
 Running : LD 
 \"C:\Program Files\Raisonance\Ride\arm-gcc\bin\arm-none-eabi-gcc.exe" -mcpu=cortex-m3 -mthumb  -Wl,-T -Xlinker "C:\Raisonance\toggle_with_CircleOS\objdebug\toggle_with_CircleOS.elf.ld" -u _start  -nostartfiles -Wl,-Map -Xlinker "C:\Raisonance\toggle_with_CircleOS\objdebug\toggle_with_CircleOS.map"   
 \"C:\Program Files\Raisonance\Ride\arm-gcc\bin\arm-none-eabi-objcopy.exe" "C:\Raisonance\toggle_with_CircleOS\objdebug\toggle_with_CircleOS.elf" --target=ihex "C:\Raisonance\toggle_with_CircleOS\objdebug\toggle_with_CircleOS.hex" 
 \"C:\Program Files\Raisonance\Ride\Bin\rexrdr.exe" "C:\Raisonance\toggle_with_CircleOS\objdebug\toggle_with_CircleOS.elf.sizetmp" 0 "C:\Program Files\Raisonance\Ride\arm-gcc\bin\arm-none-eabi-size.exe" "C:\Raisonance\toggle_with_CircleOS\objdebug\toggle_with_CircleOS.elf" 
 \"C:\Program Files\Raisonance\Ride\Bin\dwf2xml.exe" "C:\Raisonance\toggle_with_CircleOS\toggle_with_CircleOS.dbi" "C:\Raisonance\toggle_with_CircleOS\toggle_with_CircleOS-globals.Circle_Debug.xml" "C:\Raisonance\toggle_with_CircleOS\toggle_with_CircleOS.Circle_Debug.xml" 
  
Build failed

Last edited by Rayman (2008-04-09 19:08:02)

lionel · 2008-04-10 07:31:59

Can you open a command prompt and copy/paste the last line executed, i.e.

Code:

"C:\Program Files\Raisonance\Ride\Bin\dwf2xml.exe" "C:\Raisonance\toggle_with_CircleOS\toggle_with_CircleOS.dbi" "C:\Raisonance\toggle_with_CircleOS\toggle_with_CircleOS-globals.Circle_Debug.xml" "C:\Raisonance\toggle_with_CircleOS\toggle_with_CircleOS.Circle_Debug.xml"

and show me the output ?

Lionel

Rayman · 2008-04-10 12:38:37

Well, it's strange... A Windows message box with title "dwf2xml.exe - Entry point not found" pops up with this message:

The procedure entry point DllEntryPoint could not be located in the dynamic link library SX32W.dll.

lionel · 2008-04-11 07:37:51

I think this DLL has problems working with Vista 64bit. We will make some tests here.

In the meantime, the best thing to do is to comment out the dwf2xml step (it is only needed to create the list of globals so I bet you can live without it ). you can save the following file:

ftp://www.raisonance.com/pub/forum/stm3 … /LD.config

into "C:\Program Files\Raisonance\Ride\config\ARM" and that should do the trick.

$1

regards
Lionel

Rayman · 2008-04-11 12:23:34

Thanks! I'll try that. This was with regular WindowsXP. (I already gave up trying RLink with Vista-64).

Update: I tried this and it worked. Build now "suceeded". Thanks!

Last edited by Rayman (2008-04-11 15:26:09)

# 1 2008-04-09 18:40:14 "Build failed": But it didn't!

"Build failed": But it didn't!

Code:

# 2 2008-04-10 07:31:59 "Build failed": But it didn't!

Re: "Build failed": But it didn't!

Code:

# 3 2008-04-10 12:38:37 "Build failed": But it didn't!

Re: "Build failed": But it didn't!

# 4 2008-04-11 07:37:51 "Build failed": But it didn't!

Re: "Build failed": But it didn't!

# 5 2008-04-11 12:23:34 "Build failed": But it didn't!

Re: "Build failed": But it didn't!

Board footer