STM CircleOS forum / RIDE7 loses settings when saving.

bugbuster · 2008-04-04 21:38:51

If I set Project Properties/Advanced ARM Options/Processor/Device=STM32F103RBT6 and Boot mode=RAM, and then I save the project, when I return to the Properties window, the settings are back to Device=STM32F103VTB6 and Boot mode=Flash.

Is that the expected result?

lionel · 2008-04-07 08:05:33

No. That is unexpected...

Can you send me the .rapp file corresponding to the application in the project?

regards
Lionel

# 1 2008-04-04 21:38:51 RIDE7 loses settings when saving.

RIDE7 loses settings when saving.

# 2 2008-04-07 08:05:33 RIDE7 loses settings when saving.

Re: RIDE7 loses settings when saving.

Board footer