STM CircleOS forum / Porting IAR project to Ride7

softy · 2013-01-02 04:19:45

Hi,
How can I port a IAR project to IAR.IS there any specific guidelines for doing that.
Rgds,
Softy

softy · 2013-01-02 09:49:33

Or the other way round can we create Evoprimer projects on IAR and run it via ST Link .
Rgds,
Softy

softy · 2013-01-08 09:07:13

Any update on this .
Rgds,
Softy

Etienne.C · 2013-01-08 09:56:13

Hi,
To transfer an IAR to a Ride project you need to create a new project in Ride7 and copy on it all the source file.
If everything is in c it should be easy but if you have some assembler code, you have to transcript all and that can be complicated.
You should also try to set the options in Ride7 like (or approaching) to the setting of the IAR project.
If you need just to debug the application, you can just copy the .elf file from IAR project and debug with Ride7.

Regards,
Etienne

softy · 2013-01-08 10:32:25

Can we create a project with IAR and run it on Evoprimer.I have the licensed IAR but not Ride7.What will the interface for debugging same as RLink or STlink?
Rgds,
Softy

Etienne.C · 2013-01-08 11:05:58

Evoprimer can debug only with RLink and is working only with Ride7.
Then, you need to buy the Ride license.
Etienne

softy · 2013-01-08 11:38:21

Hi Etienne,
Thanks for the reply.
Rgds,
Softy

# 1 2013-01-02 04:19:45 Porting IAR project to Ride7

Porting IAR project to Ride7

# 2 2013-01-02 09:49:33 Porting IAR project to Ride7

Re: Porting IAR project to Ride7

# 3 2013-01-08 09:07:13 Porting IAR project to Ride7

Re: Porting IAR project to Ride7

# 4 2013-01-08 09:56:13 Porting IAR project to Ride7

Re: Porting IAR project to Ride7

# 5 2013-01-08 10:32:25 Porting IAR project to Ride7

Re: Porting IAR project to Ride7

# 6 2013-01-08 11:05:58 Porting IAR project to Ride7

Re: Porting IAR project to Ride7

# 7 2013-01-08 11:38:21 Porting IAR project to Ride7

Re: Porting IAR project to Ride7

Board footer