Hello,
I have used ride for a few years now. Recently ,I moved to a new version of ride because my computer crashed. Now, I,m using XP professional instead of vista, which I used before. Because I moved to the new version of ride, I could not use precompiled libraries anymore, so I added all the st-libraries to my main-file and a few header files ('controller2.h' , ''controller2.c'' and 'spi_flash.h'). I use microcontroller : stm32f103vbt6.
I use the ''STM32Lib-v203'''- library.
The main file begins as follows:
#include "libraries/spi_flash.h"
#include "libraries/controller2.h"
#include "libraries/stm32f10x_map.h"
#include "libraries/stm32f10x_can.h"
#include "libraries/stm32f10x_gpio.h"
#include "libraries/stm32f10x_nvic.h"
#include "libraries/stm32f10x_flash.h"
#include "libraries/stm32f10x_dma.h"
#include "libraries/stm32f10x_dac.h"
#include "libraries/stm32f10x_pwr.h"
#include "libraries/stm32f10x_rtc.h"
#include "libraries/stm32f10x_usart.h"
#include "libraries/stm32f10x_spi.h"
#include "libraries/stm32f10x_adc.h"
#include "libraries/stm32f10x_rcc.h"
#include "libraries/stm32f10x_bkp.h"
#include "libraries/stm32f10x_crc.h"
#include "libraries/stm32f10x_fsmc.h"
#include "libraries/stm32f10x_i2c.h"
#include "libraries/stm32f10x_sdio.h"
#include "libraries/stm32f10x_systick.h"
#include "libraries/stm32f10x_dbgmcu.h"
#include "libraries/stm32f10x_iwdg.h"
#include "libraries/stm32f10x_tim.h"
The files "spi_flash.h'' and ''controller2.h" are self-written files. The rest are st-header files.
The begin of "spi_flash.h" looks like:
#include "stm32f10x_map.h"
#include "stm32f10x_can.h"
#include "stm32f10x_gpio.h"
#include "stm32f10x_nvic.h"
#include "stm32f10x_flash.h"
#include "stm32f10x_dma.h"
#include "stm32f10x_dac.h"
#include "stm32f10x_pwr.h"
#include "stm32f10x_rtc.h"
#include "stm32f10x_type.h"
#include "stm32f10x_usart.h"
#include "stm32f10x_spi.h"
#include "stm32f10x_adc.h"
#include "stm32f10x_rcc.h"
#include "stm32f10x_bkp.h"
#include "stm32f10x_fsmc.h"
#include "stm32f10x_i2c.h"
#include "stm32f10x_sdio.h"
#include "stm32f10x_systick.h"
#include "stm32f10x_dbgmcu.h"
#include "stm32f10x_iwdg.h"
#include "stm32f10x_tim.h"
'controller.h'' has no header files.
The begin of another function called "controller.c" looks like:
#include "spi_flash.h"
#include "controller2.h"
//#include "stm32f10x_lib.h"
#include "stm32f10x_map.h"
#include "stm32f10x_can.h"
#include "stm32f10x_gpio.h"
#include "stm32f10x_nvic.h"
#include "stm32f10x_flash.h"
#include "stm32f10x_dma.h"
#include "stm32f10x_dac.h"
#include "stm32f10x_pwr.h"
#include "stm32f10x_rtc.h"
#include "stm32f10x_type.h"
#include "stm32f10x_usart.h"
#include "stm32f10x_spi.h"
#include "stm32f10x_adc.h"
#include "stm32f10x_rcc.h"
#include "stm32f10x_bkp.h"
#include "stm32f10x_fsmc.h"
#include "stm32f10x_i2c.h"
#include "stm32f10x_sdio.h"
#include "stm32f10x_systick.h"
#include "stm32f10x_dbgmcu.h"
#include "stm32f10x_iwdg.h"
#include "stm32f10x_tim.h"
#include "stm32f10x_can.c"
#include "stm32f10x_gpio.c"
#include "stm32f10x_nvic.c"
#include "stm32f10x_flash.c"
#include "stm32f10x_dma.c"
#include "stm32f10x_dac.c"
#include "stm32f10x_pwr.c"
#include "stm32f10x_rtc.c"
#include "stm32f10x_usart.c"
#include "stm32f10x_spi.c"
#include "stm32f10x_adc.c"
#include "stm32f10x_rcc.c"
#include "stm32f10x_bkp.c"
#include "stm32f10x_fsmc.c"
#include "stm32f10x_i2c.c"
#include "stm32f10x_sdio.c"
#include "stm32f10x_systick.c"
#include "stm32f10x_dbgmcu.c"
#include "stm32f10x_iwdg.c"
#include "stm32f10x_tim.c"
In the main file, the function ''MUCB_Configure(57600);'' of "'controller.h" is called at the beginning. This function configures multiple peripherals. It calls e.g. the function ''void RCC_Configuration(void)'' by itself. This function configures the clocks. The content of the function is:
void RCC_Configuration(void)
{
/* RCC system reset(for debug purpose) */
RCC_DeInit();
/* Enable HSE */
RCC_HSEConfig(RCC_HSE_ON);
/* Wait till HSE is ready */
HSEStartUpStatus = RCC_WaitForHSEStartUp();
if (HSEStartUpStatus == SUCCESS)
{
/* Enable Prefetch Buffer */
FLASH_PrefetchBufferCmd(FLASH_PrefetchBuffer_Enable);
/* Flash 2 wait state */
FLASH_SetLatency(FLASH_Latency_2);
/* HCLK = SYSCLK */
RCC_HCLKConfig(RCC_SYSCLK_Div1);
/* PCLK2 = HCLK */
RCC_PCLK2Config(RCC_HCLK_Div1);
/* PCLK1 = HCLK/2 */
RCC_PCLK1Config(RCC_HCLK_Div2);
/* PLLCLK = 8MHz * 5 = 40 MHz */
RCC_PLLConfig(RCC_PLLSource_HSE_Div1, RCC_PLLMul_9);
/* Enable PLL */
RCC_PLLCmd(ENABLE);
/* Wait till PLL is ready */
while (RCC_GetFlagStatus(RCC_FLAG_PLLRDY) == RESET)
{}
/* Select PLL as system clock source */
RCC_SYSCLKConfig(RCC_SYSCLKSource_PLLCLK);
/* Wait till PLL is used as system clock source */
while (RCC_GetSYSCLKSource() != 0x08)
{}
}
/* Enable peripheral clocks */
RCC_AHBPeriphClockCmd (RCC_AHBPeriph_DMA1, ENABLE);
RCC_APB1PeriphClockCmd(
RCC_APB1Periph_USART2 |
RCC_APB1Periph_SPI2 |
RCC_APB1Periph_CAN, ENABLE);
RCC_APB2PeriphClockCmd(
RCC_APB2Periph_USART1 |
RCC_APB2Periph_GPIOA |
RCC_APB2Periph_GPIOB |
RCC_APB2Periph_GPIOC |
RCC_APB2Periph_GPIOD |
RCC_APB2Periph_GPIOE |
RCC_APB2Periph_AFIO |
RCC_APB2Periph_ADC1, ENABLE);
}
When I debug my project, it seems to hang at the function 'while (RCC_GetSYSCLKSource() != 0x08)' . The rest of 'MUCB_configure' and 'main'is not executed.
My question is: "What cause the application to hang?"
Thank you
Last edited by MartijnK (2012-01-17 13:59:02)
