/var/www/restricted/ssh/stm32/www/stm32circle/ STM CircleOS forum / Default app ld ram/flash size

Username:     
Password:     
             

Forum

# 1   2010-06-04 13:51:13 Default app ld ram/flash size

diabolo38
Member
Registered: 2010-03-12
Posts: 50

Default app ld ram/flash size

The default application ld file has small amount of ram and flash is it safe to move them to use all what is available ie 64K ram and  512K of flash like below?

  RAM (xrw) : ORIGIN = 0x20000000, LENGTH = 64K
  FLASH (rx) : ORIGIN = 0x8006000, LENGTH = 512K-0x6000

if not safe what are the upper limit ?

thanks in advances

Offline

 

# 2   2010-06-04 15:09:02 Default app ld ram/flash size

ntrf.zns
Member
From: Belgorod, Russia
Registered: 2009-11-01
Posts: 134

Re: Default app ld ram/flash size

The upper 132Kb of flash and upper 10Kb of RAM are used by CircleOS on Primer2.

  RAM (xrw) : ORIGIN = 0x20000000, LENGTH = 64K-10K
  FLASH (rx) : ORIGIN = 0x8006000, LENGTH = 512K-24K-132K

Offline

 

# 3   2010-06-10 14:59:52 Default app ld ram/flash size

diabolo38
Member
Registered: 2010-03-12
Posts: 50

Re: Default app ld ram/flash size

thanks

Offline

 

Board footer