STM CircleOS forum / EchoIrDA

SamP · 2010-02-22 16:53:55

I seem to be having trouble with the EchoIrDA program.

I have 2 STM32 Primer 2s and the EchoIrDA program that is meant to communicate between them doesn't seem to work. I have managed to get a connection between the devices and an IrDA port on my pc so it is not a hard ware fault, nor does it seem to be a major software fault.

I have managed to twice get the Echo working but most of the time I try nothing happens except the start up screen. I'm just wondering if anyone else has had the same problem and if they have managed to find a solution.

thanks

SamP

yrt · 2010-02-23 09:01:05

Hi,

We use this application for testing Primer at the end of production. So it works between two Primers with two different programs (one sender and one receiver) !
The only problem we met was the use of precompiled ST library : the baud rate was not the expected value, due to the fact that ST library work with 8 MHz quartz frequency by default, instead of 12 MHz for the Primer.

plmuthu25 · 2010-02-23 13:10:57

hi @all , i need to program using joystick in stm32 primer2 ...

if i press the up button i should display 1 and so on ..
i need to know , joysticks is connected to which pin ... so that it will be easy to program it ...
plz help me ...

# 1 2010-02-22 16:53:55 EchoIrDA

EchoIrDA

# 2 2010-02-23 09:01:05 EchoIrDA

Re: EchoIrDA

# 3 2010-02-23 13:10:57 EchoIrDA

Re: EchoIrDA

Board footer