STM CircleOS forum / OPI driver error

FXH · 2007-12-24 01:46:53

After downloading and running couple of example programs (such as the Toggle) now when I try to start a debug session I get the following error message from OPI driver:
"This version of the software only handles RLink with firmware version up to 0.0.255"
The unit doesn't work. What is wrong?

Thanks,
Farid

lionel · 2008-01-03 15:04:21

Hello Farid,

This error comes up often when the STM32-Primer is not correctly connected to the PC. You should :

1. Check that an USB cable connects your PC to the DEBUG mini-USB connector on the Primer
2. Push the orange button on the Primer to power it up
3. You can check in Windows Device Manager that the RLink appears in the Jungo section. If it does not, the driver is probably badly installed
4. Try again to program your Primer.

Lionel

# 1 2007-12-24 01:46:53 OPI driver error

OPI driver error

# 2 2008-01-03 15:04:21 OPI driver error

Re: OPI driver error

Board footer