STM CircleOS forum / Compile code for the Primer2

tkj · 2009-08-24 20:30:54

Is it possible to make some code for the Primer2 from scratch, so you doesn't need to have CircleOS installed?
I know that would remove the LCD support and such, which then should be programmed manually - but is it possible?

I'm just cuirious if it's possible to make a LED Blink demo fx. So when you turn it on, it just starts blinking, without showing any OS.

Best Regards
Thomas Jespersen

Francis · 2009-08-25 06:30:40

There is already such an example (RIDE\Examples\ARM\Primer\STM32Primer2\toggle).

tkj · 2009-08-25 06:57:39

Ahh, I see...
I'm sorry

nemui · 2009-11-24 02:46:33

Hi,ALL.

I made a example of mini-photoframe for STM32 Primer2
using Chan's FatFs WITHOUT circleOS.

If you want primer2-project winthout CircleOS,try this.
http://cid-36f4d1230f8a673c.skydrive.li … PhotoFrame

To build this project,you should edit makefile your build environment.
(My build environment is CodeSourcery G++ Lite Edition for ARM and gnu make v3.81.)
To program hexfile into primer2,use RFlasher.

# 1 2009-08-24 20:30:54 Compile code for the Primer2 - without CircleOS

Compile code for the Primer2 - without CircleOS

# 2 2009-08-25 06:30:40 Compile code for the Primer2 - without CircleOS

Re: Compile code for the Primer2 - without CircleOS

# 3 2009-08-25 06:57:39 Compile code for the Primer2 - without CircleOS

Re: Compile code for the Primer2 - without CircleOS

# 4 2009-11-24 02:46:33 Compile code for the Primer2 - without CircleOS

Re: Compile code for the Primer2 - without CircleOS

Board footer