STM CircleOS forum / Circle_Mgr Error

peterd · 2009-03-14 23:27:36

Hello ,
I get my Primer2 and load the new OS Version 3.6.
If I run circle_mgr I get a error:

Connecting to RLink... OK
Connecting to target...
!!! Error 203: Wrong MCU device ID: 0x10016414

The download out of the Ride ide is working,
but if i try to debug after some steps i get the message - lost communication.
Possibly a second problem.

Peter

Francis · 2009-03-15 11:30:41

Did you install the new version (we recommend using the 'cd-rom image from this web site). This problem could be caused by an old version of the software (delivered with the Primer1).

dohko · 2009-08-16 10:23:00

You have to download cdrom image with new version.
Uninstall old version and reinstall with demo.exe on cdrom image.

Then, you can launch Restore_Primer2_Circle_Factory.bat available on Primer2_ZIP update.

matloub · 2009-08-17 08:21:21

Hi

Since this post from Francis a newer version is available in
http://www.mcu-raisonance.com/mcu_downloads.html

Regards,
Matloub

# 1 2009-03-14 23:27:36 Circle_Mgr Error

Circle_Mgr Error

# 2 2009-03-15 11:30:41 Circle_Mgr Error

Re: Circle_Mgr Error

# 3 2009-08-16 10:23:00 Circle_Mgr Error

Re: Circle_Mgr Error

# 4 2009-08-17 08:21:21 Circle_Mgr Error

Re: Circle_Mgr Error

Board footer