STM CircleOS forum / What to do with error 203 wrong mcu id 0x10016414 with primer2?

Bruum · 2009-08-06 16:44:27

Helo! Problem is with add_to_circle.bat , circle_mgr.exe and cortex_pgm.exe . Somebody know somethink about fixing this problem?
Best regards!

ShadowPhoenix · 2009-08-06 17:15:24

Do you have the latest version of Ride? Do Not Use The CD. It has very old Ride version. Make sure to also downloaded ride-arm toolset

Bruum · 2009-08-06 17:22:30

Helo! After reinstal ride7 i can programing flash via rflasher. But problem with applications add to circle itd. already egsist.

ShadowPhoenix · 2009-08-06 23:44:42

What version of Ride7 do you have?

Help-> About.

Post a screenshot if unsure. It should look something like this...

Last edited by ShadowPhoenix (2009-08-06 23:48:36)

Bruum · 2009-08-07 07:30:27

Hi! Thanks for reply. My version of ride7 is 7.15.0000 and rkit 1.16.0930. I yesterdey now install this rkit and now applications work properly. Litle properly because new wrong-sometimes "fatal error 103", sometimes about FAT table. This errors ocurs when work add_to_circle and i can do this. Best regards!

ShadowPhoenix · 2009-08-08 01:01:19

Upgrade to latest http://www.mcu-raisonance.com/mcu_downloads.html

Bruum · 2009-08-08 21:17:07

Helo! Now i have ride7 7.22.09.0203 and rkit-arm 1.16.0930 from your link. And is the same problem fatal error 103 problem with object when click add_to_circle.bat . Restore.....factory.bat work properly. Thanks for answering and best regards!

ShadowPhoenix · 2009-08-09 00:59:55

So... did that fixed it?

Bruum · 2009-08-09 11:16:18

Unfortunely not-add_to_circle not to work....

ShadowPhoenix · 2009-08-09 15:46:40

Is your STM32 on (e.g. did you press center button before programming it?) Is the second red light on and does it blink?

Bruum · 2009-08-09 19:26:23

Helo! Absolutely yes! Write on console:
Link Failed < File 'Application.o'>
!!! Error 103: Fatal error detected

ShadowPhoenix · 2009-08-10 07:06:29

Hmm, wait for Francis to respond. He might have better information...

Francis · 2009-08-10 07:23:13

Add_to_circle calls the linker. It seems that the linker is not found. Could you check that "C:\Program Files\Raisonance\Ride\arm-gcc\bin" is declared in your PATH definition. Are you able to open and to link the project under RIDE ?

Bruum · 2009-08-10 08:13:22

Helo and thanks for answer! I have two operating systems and xp is on D: partition. May be here is problem-add_to_circle calls linker in c:\program... when Ride is instaled on D:\Program...? I make the test about working Ride.

Bruum · 2009-08-16 20:23:56

Helo! I can open and build project in ride7. I have "D:\Program Files\Raisonance\Ride\arm-gcc\bin" in path def. Somebody can help?
p.s.-All in Path:
D:\Program Files\CodeSourcery\Sourcery G++ Lite\bin;D:\Program Files\ARM\bin\win_32-pentium;D:\Program Files\ARM\RVD\Core\1.8\734\win_32-pentium\bin;%SystemRoot%\system32;%SystemRoot%;%SystemRoot%\System32\Wbem;d:\RIDE\Bin;D:\PROGRA~1\COSIDS;D:\Program Files\ARM\Utilities\FLEXlm\9.2\release\win_32-pentium;D:\Program Files\ARM\RVCT\Programs\2.2\349\win_32-pentium;D:\Program Files\OpenOCD\0.2.0\bin\;D:\Program Files\OpenOCD\0.1.0\bin\;D:\Program Files\Coreutils\bin\;D:\Program Files\Raisonance\Ride\arm-gcc\bin;D:\Program Files\Raisonance\Ride\bin

Last edited by Bruum (2009-08-16 20:26:35)

matloub · 2009-08-17 08:18:39

Hi Brumm

I am going to try to help you on this issue.
Reading your post it seems you have a link failed when running add to circle.
This is something which can happen so it does not show the problem.

I suggest:

1. Validate that your software and hardware are working correctly:
+ Open a project from D:\program files\raisonance\Ride\Examples\ARM\Primer (depending on your primer)
+ Start the debug and let us know if it works

2. Reproduce your issue
+ Send the folder where you try this add circle command to support@raisonance.com
I will try it here and see if this a problem related to your environment or not.
+ Try on another computer if you can

Regards
Matloub

# 1 2009-08-06 16:44:27 What to do with error 203 wrong mcu id 0x10016414 with primer2?

What to do with error 203 wrong mcu id 0x10016414 with primer2?

# 2 2009-08-06 17:15:24 What to do with error 203 wrong mcu id 0x10016414 with primer2?

Re: What to do with error 203 wrong mcu id 0x10016414 with primer2?

# 3 2009-08-06 17:22:30 What to do with error 203 wrong mcu id 0x10016414 with primer2?

Re: What to do with error 203 wrong mcu id 0x10016414 with primer2?

# 4 2009-08-06 23:44:42 What to do with error 203 wrong mcu id 0x10016414 with primer2?

Re: What to do with error 203 wrong mcu id 0x10016414 with primer2?

# 5 2009-08-07 07:30:27 What to do with error 203 wrong mcu id 0x10016414 with primer2?

Re: What to do with error 203 wrong mcu id 0x10016414 with primer2?

# 6 2009-08-08 01:01:19 What to do with error 203 wrong mcu id 0x10016414 with primer2?

Re: What to do with error 203 wrong mcu id 0x10016414 with primer2?

# 7 2009-08-08 21:17:07 What to do with error 203 wrong mcu id 0x10016414 with primer2?

Re: What to do with error 203 wrong mcu id 0x10016414 with primer2?

# 8 2009-08-09 00:59:55 What to do with error 203 wrong mcu id 0x10016414 with primer2?

Re: What to do with error 203 wrong mcu id 0x10016414 with primer2?

# 9 2009-08-09 11:16:18 What to do with error 203 wrong mcu id 0x10016414 with primer2?

Re: What to do with error 203 wrong mcu id 0x10016414 with primer2?

# 10 2009-08-09 15:46:40 What to do with error 203 wrong mcu id 0x10016414 with primer2?

Re: What to do with error 203 wrong mcu id 0x10016414 with primer2?

# 11 2009-08-09 19:26:23 What to do with error 203 wrong mcu id 0x10016414 with primer2?

Re: What to do with error 203 wrong mcu id 0x10016414 with primer2?

# 12 2009-08-10 07:06:29 What to do with error 203 wrong mcu id 0x10016414 with primer2?

Re: What to do with error 203 wrong mcu id 0x10016414 with primer2?

# 13 2009-08-10 07:23:13 What to do with error 203 wrong mcu id 0x10016414 with primer2?

Re: What to do with error 203 wrong mcu id 0x10016414 with primer2?

# 14 2009-08-10 08:13:22 What to do with error 203 wrong mcu id 0x10016414 with primer2?

Re: What to do with error 203 wrong mcu id 0x10016414 with primer2?

# 15 2009-08-16 20:23:56 What to do with error 203 wrong mcu id 0x10016414 with primer2?

Re: What to do with error 203 wrong mcu id 0x10016414 with primer2?

# 16 2009-08-17 08:18:39 What to do with error 203 wrong mcu id 0x10016414 with primer2?

Re: What to do with error 203 wrong mcu id 0x10016414 with primer2?

Board footer