STM CircleOS forum / Primer2 dead after COS3.7 update

csbick · 2009-07-27 14:05:40

Hi everybody,
I upgraded to 3.7 with the downlowd from the resources tab. Acc to the dos-box all went ok!
But the primer is dead now. display backlight goes on but no sound + display output.
Tried it many times with hard-reset in between.
Anyone a guess?

Thanks

ShadowPhoenix · 2009-07-27 15:44:43

Can you connect to it from the computer?

csbick · 2009-07-28 08:32:43

Hi, yes it is recognized by the flasher tool and flashing works ok.
When I connect through the USB "STM32" connection the red LED is on but PC detects nothing.

yrt · 2009-07-28 08:37:21

Did you upgrade your Primer from "Primer2_Upgrade.zip" file or from sources zip file ?
The upgrade file contains the command "Restore_Primer2_Circle_Factory.bat" that loads CircleOS + applications.
The command "Program_Primer2_CircleOS_only.bat" loads only CircleOS.
Did you try these two commands ?

Yves

csbick · 2009-07-28 08:44:26

yes I used the "Restore_Primer2_circle factory.bat" from the primer2 upgrade.zip.

csbick · 2009-07-28 08:49:16

just discovered another thing: (see pic)

Is there a new Device used on newest primers?

repzak · 2009-07-28 09:50:55

Hello,

I also once got that reply, can't remember the reason, but be sure to have the latest circle_mgr.exe

Kasper

csbick · 2009-07-28 10:32:49

Hi,
I used the one that comes with the update.zip file.

Marek · 2009-07-28 10:40:58

Download the latest version from:
http://www.mcu-raisonance.com/index.php … _downloads

csbick · 2009-07-28 11:17:14

used ver 1.0.9.225 from march.
what do download from your link? (BTW: I hate this "please rtegister before ....")

csbick · 2009-07-28 12:00:02

ok, after deinstall of all, register at raisonance, install of Ride7 and RKit-ARM, the device ID is no problem anymore. I successfully flashed COS 3.7 and it worked. Many Thanks for hint.
Perhaps Rai is reading this: they should include the new circle_mgr.exe in the update-zip.

I then tried to update another Primer2:
- the second primer is not recognized: in the device manager I got a "RLinkWinUSBClass" device with a yellow sign...
- a "reinstall driver" produces:

- connecting the first primer again a device called "Jungo" with "RLink USB" can be seen

This looks to me as if the RLink driver is locked to a kind of serial number of the internal dongle.

Do you know how to work with more than one primer?

Thanks

Francis · 2009-08-03 07:05:13

There are some possibilities to select a Primer with its serial number, but I don't think that it is implemented in Circle_mgr.
For debugging, when a session is started with one Primer, you can start (from another RIDE) another session and it will drive another Primer (if any).

# 1 2009-07-27 14:05:40 Primer2 dead after COS3.7 update

Primer2 dead after COS3.7 update

# 2 2009-07-27 15:44:43 Primer2 dead after COS3.7 update

Re: Primer2 dead after COS3.7 update

# 3 2009-07-28 08:32:43 Primer2 dead after COS3.7 update

Re: Primer2 dead after COS3.7 update

# 4 2009-07-28 08:37:21 Primer2 dead after COS3.7 update

Re: Primer2 dead after COS3.7 update

# 5 2009-07-28 08:44:26 Primer2 dead after COS3.7 update

Re: Primer2 dead after COS3.7 update

# 6 2009-07-28 08:49:16 Primer2 dead after COS3.7 update

Re: Primer2 dead after COS3.7 update

# 7 2009-07-28 09:50:55 Primer2 dead after COS3.7 update

Re: Primer2 dead after COS3.7 update

# 8 2009-07-28 10:32:49 Primer2 dead after COS3.7 update

Re: Primer2 dead after COS3.7 update

# 9 2009-07-28 10:40:58 Primer2 dead after COS3.7 update

Re: Primer2 dead after COS3.7 update

# 10 2009-07-28 11:17:14 Primer2 dead after COS3.7 update

Re: Primer2 dead after COS3.7 update

# 11 2009-07-28 12:00:02 Primer2 dead after COS3.7 update

Re: Primer2 dead after COS3.7 update

# 12 2009-08-03 07:05:13 Primer2 dead after COS3.7 update

Re: Primer2 dead after COS3.7 update

Board footer