/var/www/restricted/ssh/stm32/www/stm32circle/ STM CircleOS forum / Primer2: OPI Driver Error

Username:     
Password:     
             

Forum

# 1   2009-06-12 14:02:43 Primer2: OPI Driver Error

Mysterio
Member
From: Germany/NRW
Registered: 2009-05-22
Posts: 23

Primer2: OPI Driver Error

Hello,

I wantet to compile the CircleOS 3.7 ver. on Primer 2, but there came an error from the OPI Driver:

Code Size limit exceeded

How can I fix that problem?...


The only definitly knowledge we have, is that we don't know anything. -Sokrates-

Offline

 

# 2   2009-06-12 15:10:34 Primer2: OPI Driver Error

Francis
Administrator
From: France-Grenoble
Registered: 2007-07-09
Posts: 890

Re: Primer2: OPI Driver Error

"OPI Driver" means that the error comes when debugging, not compiling.
1. Keep the highest optimization level for debugging.
2. Check that you are working with a recent version of RIDE7+RKitARM.

Offline

 

# 3   2009-06-15 07:44:24 Primer2: OPI Driver Error

Mysterio
Member
From: Germany/NRW
Registered: 2009-05-22
Posts: 23

Re: Primer2: OPI Driver Error

Ok thanks,
the OPI driver error disappeared but now I have a problem when LD is running:
Running: LD

(By the way: I Am a newbie in this, so I am sorry for my expression mistakes)

\"C:\Programme\Raisonance\Ride\arm-gcc\bin\arm-none-eabi-gcc.exe" -mcpu=cortex-m3 -mthumb  -Wl,-T -Xlinker "C:\Programme\Raisonance\Ride\Lib\ARM\Circle\OS\Primer2_obj\Primer2_Circle.elf.ld" -u _start -Wl,-static -Wl,--gc-sections -nostartfiles -Wl,-Map -Xlinker "C:\Programme\Raisonance\Ride\Lib\ARM\Circle\OS\Primer2_lst\Primer2_Circle.map"   
c:/programme/raisonance/ride/arm-gcc/bin/../lib/gcc/arm-none-eabi/4.2.3/../../../../arm-none-eabi/bin/ld.exe: C:\Programme\Raisonance\Ride\Lib\ARM\Circle\OS\Primer2_obj\Primer2_Circle.elf section .non_debuggable_code will not fit in region FLASHDATA 
c:/programme/raisonance/ride/arm-gcc/bin/../lib/gcc/arm-none-eabi/4.2.3/../../../../arm-none-eabi/bin/ld.exe: address 0x8081979 of C:\Programme\Raisonance\Ride\Lib\ARM\Circle\OS\Primer2_obj\Primer2_Circle.elf section ._checkidata is not within region FLASHDATA 
c:/programme/raisonance/ride/arm-gcc/bin/../lib/gcc/arm-none-eabi/4.2.3/../../../../arm-none-eabi/bin/ld.exe: address 0x8081979 of C:\Programme\Raisonance\Ride\Lib\ARM\Circle\OS\Primer2_obj\Primer2_Circle.elf section ._checkidata is not within region FLASHDATA 
c:/programme/raisonance/ride/arm-gcc/bin/../lib/gcc/arm-none-eabi/4.2.3/../../../../arm-none-eabi/bin/ld.exe: region FLASHDATA overflowed by 6521 bytes 
collect2: ld returned 1 exit status


(An Annotation: I tried to clear the display from all pictures, so I set the picturecodelines as comment lines, that the compiler ignores them)

Last edited by Mysterio (2009-06-15 07:45:22)


The only definitly knowledge we have, is that we don't know anything. -Sokrates-

Offline

 

Board footer