STM CircleOS forum / AD-Converter --> sample for STM32Primer1

technikumwien · 2009-05-15 18:51:01

Hello everybody,

we need your help very urgent!!!

We want to do an AD-conversion with the STM32Primer1 but we dont know how to do.
Can anybody send us an example or help us in any other way.

We want to use GPIO PA1 to read an analoge value.

Thanks very much for your help.

Best regards,

Daniel

Francis · 2009-05-17 01:22:53

You can look in CircleOS how the battery (and the temperature) are measured. You can also look at the ST examples in their STM32 library.

Buttermaker · 2009-05-20 12:10:52

is there any open sample code for adc read ?

Francis · 2009-05-20 15:04:24

For the Primer1 you can look at the ECG application. It uses the ADC.

Buttermaker · 2009-05-25 10:55:10

Francis :
For the Primer1 you can look at the ECG application. It uses the ADC.

I only have the Primer 2 and planning to measure 3 analog values with the adc.

Buttermaker · 2009-05-28 13:46:01

Buttermaker :
Francis :
For the Primer1 you can look at the ECG application. It uses the ADC.
I only have the Primer 2 and planning to measure 3 analog values with the adc.

is there a list of adc commands in any of the documentfiles ?

# 1 2009-05-15 18:51:01 AD-Converter --> sample for STM32Primer1

AD-Converter --> sample for STM32Primer1

# 2 2009-05-17 01:22:53 AD-Converter --> sample for STM32Primer1

Re: AD-Converter --> sample for STM32Primer1

# 3 2009-05-20 12:10:52 AD-Converter --> sample for STM32Primer1

Re: AD-Converter --> sample for STM32Primer1

# 4 2009-05-20 15:04:24 AD-Converter --> sample for STM32Primer1

Re: AD-Converter --> sample for STM32Primer1

# 5 2009-05-25 10:55:10 AD-Converter --> sample for STM32Primer1

Re: AD-Converter --> sample for STM32Primer1

Francis :

# 6 2009-05-28 13:46:01 AD-Converter --> sample for STM32Primer1

Re: AD-Converter --> sample for STM32Primer1

Buttermaker :

Francis :

Board footer