/var/www/restricted/ssh/stm32/www/stm32circle/ STM CircleOS forum / circle_mgr problem

Username:     
Password:     
             

Forum

# 1   2009-05-02 10:05:33 circle_mgr problem (project: Circle OS 3.7)

guystm32
New member
Registered: 2009-03-10
Posts: 1

circle_mgr problem (project: Circle OS 3.7)

if I try to upload an application eg playwav with this OS v3.71 the circle_mgr give this error:

*** Launching : circle_mgr.exe AApplication.o L S

Circle_Mgr: software for managing CircleOS applications.
Copyright Raisonance 2007.

Connecting to RLink... OK
Connecting to target... OK
          Silicon Revision Id: 0x10016414.
          Option bytes: RDP=0xA5, USER=0xFF, WRP=0xFFFFFFFF
OK
Reading FAT table...
         !!! Error 103: Error reported by the DTC
Press any key to continue . . .

I build this OS using the Ride project provided in the zip. I just downloaded the playwav app to try it out without rebuilding it. I simply took the to_circle bat file provided.

Meanwhile I downloaded the latest ride 7.18 + rkit and all seems to work now !
So the ride7 that comes with the primer 2 CD is old and not goody everyone download the latest ride circle OS 3.7 is automatically provided in the tree.

-G

Last edited by guystm32 (2009-05-02 18:45:05)

Offline

 

# 2   2009-06-15 17:47:20 circle_mgr problem (project: Circle OS 3.7)

cederom
New member
From: Warsaw, Poland
Registered: 2009-03-21
Posts: 9
Website

Re: circle_mgr problem (project: Circle OS 3.7)

Thanks dude! I have exactly the same problem!

I really dont like the way raisonance prepared the Primer2 - not working with OpenOCD (cannot be programmed under unix), lot of bugs in design, lot of bugs in attached stuff :-(

I have bought two of them and one is dead after one hour. This realy does not convince me to the Raisonance products not stm32 family :-(

Offline

 

# 3   2009-06-15 17:57:26 circle_mgr problem (project: Circle OS 3.7)

cederom
New member
From: Warsaw, Poland
Registered: 2009-03-21
Posts: 9
Website

Re: circle_mgr problem (project: Circle OS 3.7)

I have found another solution:
-after flashing new os is working off the box but its not configured
-turn off the power for a while by removing the jumper
-turn on the power and configure device
-type "circle_mgr e*" at command prompt to format flash area that stores the program data
-now you can upload programs

Offline

 

Board footer