STM CircleOS forum / Primer2 Breakout Pin1

samarkh · 2009-01-13 14:29:56

Referring to the rear of the unit, and the Gerber files, is Pin 1 the oval pad of the breakout closet to L3 4.7uH, (marked 4R7)?
Yours Simon M

Francis · 2009-01-13 15:52:22

Follows the footprint of the connector (viewed from the bottom side):
ftp://www.raisonance.com/pub/forum/stm32circle/Extension-Footprint.JPG
We are also updating the manual, with a complete description of the extension board (mechanical data,...).

samarkh · 2009-01-13 18:17:09

Look forward to it Francis
Yours Simon M.

# 1 2009-01-13 14:29:56 Primer2 Breakout Pin1

Primer2 Breakout Pin1

# 2 2009-01-13 15:52:22 Primer2 Breakout Pin1

Re: Primer2 Breakout Pin1

# 3 2009-01-13 18:17:09 Primer2 Breakout Pin1

Re: Primer2 Breakout Pin1

Board footer