/var/www/restricted/ssh/stm32/www/stm32circle/ STM CircleOS forum / build failed

Username:     
Password:     
             

Forum

# 1   2008-10-23 19:00:21 build failed (project: MEMS Data Logger 1.0)

Cortex2008
New member
Registered: 2008-09-24
Posts: 3

build failed (project: MEMS Data Logger 1.0)

Hi matloub

i have not made any chanages in origanal code , I have using RIDE  7.00.0002, RKIT ARM 1.01.0002 supplied by stm32 primer.
I have  taken off folder read only properties option  but still getting  same message.

Building E:\STM3210_Primer\MEMS-Data-Logger-1.0_NEW\DataLoggerExe.rapp
Running : LD
\arm-none-eabi-gcc.exe -mcpu=cortex-m3 -mthumb  -Wl,-T -Xlinker "E:\STM3210_Primer\MEMS-Data-Logger-1.0_NEW\objdebug\DataLoggerExe.elf.ld" -u _start -Wl,-static -Wl,--gc-sections -nostartfiles -Wl,-Map -Xlinker "E:\STM3210_Primer\MEMS-Data-Logger-1.0_NEW\objdebug\DataLoggerExe.map"   
c:/program files/raisonance/ride/arm-gcc/bin/../lib/gcc/arm-none-eabi/4.2.0/../../../../arm-none-eabi/bin/ld.exe: region FLASH is full (E:\STM3210_Primer\MEMS-Data-Logger-1.0_NEW\objdebug\DataLoggerExe.elf section .text) 
collect2: ld returned 1 exit status 
 
Build failed



mpd

Offline

 

Board footer