|
|
|
|
STM8S_DISCOVERY used STM32_Part :-) V1.0
|
|
 |
|
Used the STM 32 form STM8S_DISCOVERY for CAN |
| Code size: | 100kb |
Author: | Matthias |
| Source files included: | yes |
Version: | V1.0 |
| Use circleOS: | no |
Creation date: | 2011-07-25 16:46:13 |
| Hardware modification: | yes |
Modification date: | 2011-07-25 16:46:13 |
| Based on the STM32 Primer: | no |
| |
| |
|
| Downloads: | 2317 |
Views: | 27842 |
| |
|
| Vote: |
|
Average ratings: | 0/5 (0 rates) |
Download:
STM8S-DISCOVERY-used-STM32-Part-V1.0.zip (365 KB) 
Description:/********************* (C) COPYRIGHT RAISONANCE S.A.S. *********************************/
/********************* (C) COPYRIGHT STMicroelectronics ********************************/
/********************* (C) Matthias ****************************************************/
/* optimized for STM8S_DISCOVERY_STM32_Part, extended and amended by Matthias email webmaster@tg-info.de
Project "STM8S_DISCOVERY_STM32_Part CAN"
Need other RLINK to Programm.
!! Hardware change !!
The Can driver is connected the external.
USB D- == CAN RX
USB D+ == CAN TX
C18 to 10uf 20V for more Input range -> work with 12 Volt for Cars
R18 remove
R21 change 0 Ohm
R22 change 0 Ohm
First step ist erase the STM32 with RFlasher7 open erase.rprj
1. Push erase
2. Option Bytes action , aktivate Program -> set all to FF -> push Write target Option Bytes now!
this must be done several times until he takes over (Step 1 and 2)
|
|
|
|
|
