STM CircleOS forum / STM32F10x_StdPeriph_Lib_V3.1.2 Template leads Primer 2 to Freeze!

thefly · 2010-02-08 15:26:48

Hi all,

i'm just trying to test the STM32 standard Peripherals with the examples. But every time when i loaded the program to the Primer2 it's just freeze, i could only do a factory reset. I loaded the Project file from the Project\Template\ and set the project property with STM3210E-EVAL and set the Prosessor as STM32F103VET6, nothing more was modified. Build was successful but after i pushed the debug->run button it's just freeze. Need your advices what have i done wrong?.

P.S. there's no problem when i load single appl. from the Ride 7 to primer 2.

thanks advanced.

yrt · 2010-02-09 07:29:15

Hi,

The examples provided with the ST library are coded for the ST evaluation cards, and you have to adapt the peripherals addresses (GPIO ports, number of pins...) declared in a header file ("stm3210e_eval.h" for example), for the Primer2, according to electrical drawings.

# 1 2010-02-08 15:26:48 STM32F10x_StdPeriph_Lib_V3.1.2 Template leads Primer 2 to Freeze!

STM32F10x_StdPeriph_Lib_V3.1.2 Template leads Primer 2 to Freeze!

# 2 2010-02-09 07:29:15 STM32F10x_StdPeriph_Lib_V3.1.2 Template leads Primer 2 to Freeze!

Re: STM32F10x_StdPeriph_Lib_V3.1.2 Template leads Primer 2 to Freeze!

Board footer