I tried to reprogram my ST32Primer2 with Restore_Primer2_Circle_Factory.bat.
But alway I get the following message
!!! WARNING: This will program the original code into the STM32-Primer2. !!!
!!! All applications currently loaded will be erased. !!!
Press Ctrl-C to abort.
Drücken Sie eine beliebige Taste . . .
Cortex_pgm: software for programming Cortex chips using a RLink as master.
Copyright Raisonance 2009.
(0)
Selecting target: STM32F103VET6...
(0)
Connecting to RLink... OK
Connecting to target...
!!! Error 203: Wrong MCU device ID: 0x10016414
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! ERROR !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
STM32-Primer2 programmation failed. Please check that the "Debug" USB connector
is plugged and that the STM32-Primer2 is powered up.
(press the STM32-Primer2 button if you are unsure)
Drücken Sie eine beliebige Taste . . .
Any idea whats wrong?
Regards,
Claus
