STM CircleOS forum / Unable to restore factory configuration

winux38 · 2009-05-02 07:02:49

WHen trying to falsh factory configuration i get the following message from the flasher at file loading : Loading data to non-physical address: 0x8060000
When proceeding to flashing I get no error but the primer doesn't boot again.
WHat did I do wrong?
thanks

Francis · 2009-05-02 08:47:58

There are two different Primers: the Primer (known on this site as Primer1) and the Primer2. It could be that you use the wrong batch.
Try to get a recent update of the software (RIDE + RKit-ARM).

winux38 · 2009-05-02 15:48:05

I have a primer2. I loaded the new CD rom image and installed all the packages.
I have the same message as before except that address is 0x802000 instead of 0x806000
regards.

winux38 · 2009-05-02 15:56:58

I solved my issue. I was using the RFlash tool loading the Primer2_Circle_Factory.hex file and I was getting the error message at loading.
Instead I used the Restore_Prmer2_Circle_Factory.bat batch file and every thing went well.

Why I am not able to reinstall factory setting with RFlasher tool?

craigh · 2009-05-15 00:24:27

Just received a Primer2 and noticed the CircleOS was an older version (3.6). I downloaded the Primer2_Upgrade.zip package (on the evening of May 13) and proceeded to upgrade using the Restore_Primer2_Circle_Factory batch file. It seemed to work with no errors, but the Primer2 doesn't work now. It just has a blank back-lit screen.

I downloaded the zip file again today, did everything the same with the new download and still nothing works.

Did I miss anything, or is something wrong?

Craig.

Last edited by craigh (2009-05-15 01:16:40)

craigh · 2009-05-15 02:46:23

Further to my last post:

There seems to be something downloaded to the flash. I ran circle_mgr with the L command and it listed several apps: Maze, Breakout, Play.wav, etc, 9 in all. The last few lines of output looked like this:

App08: Name=Laby2D , Addr:0X0801D800, Size: 4KB
!!! Error 103:
App09: - invalid name -

Then it stops here and returns the command prompt.

Hope this helps.

Craig.

Francis · 2009-05-15 06:17:04

Did you update your RIDE+RKitARM ? I suggest that you get the latest versions from the Raisonance website.

craigh · 2009-05-16 00:34:48

Hi Francis,

I had the latest version of Ride but not RKitARM when I first tried to update CircleOS. I downloaded RKitARM and installed it. This time flashing the factory configuration worked.

Thanks,

Craig.

# 1 2009-05-02 07:02:49 Unable to restore factory configuration

Unable to restore factory configuration

# 2 2009-05-02 08:47:58 Unable to restore factory configuration

Re: Unable to restore factory configuration

# 3 2009-05-02 15:48:05 Unable to restore factory configuration

Re: Unable to restore factory configuration

# 4 2009-05-02 15:56:58 Unable to restore factory configuration

Re: Unable to restore factory configuration

# 5 2009-05-15 00:24:27 Unable to restore factory configuration

Re: Unable to restore factory configuration

# 6 2009-05-15 02:46:23 Unable to restore factory configuration

Re: Unable to restore factory configuration

# 7 2009-05-15 06:17:04 Unable to restore factory configuration

Re: Unable to restore factory configuration

# 8 2009-05-16 00:34:48 Unable to restore factory configuration

Re: Unable to restore factory configuration

Board footer