STM CircleOS forum / Tutorial (Cubic) 1.1 not compiling!

softy · 2012-12-10 12:00:39

Hi,
I am using the STM32F103VGT6 Evoprimer and trying to compile the Tutorial (Cubic) project for the same .But I am getting this error :

<my working directory>\Downloads\Tutorial-Cubic-1.1\CircleOS_Tutorial\/circle_api.h:25:27: fatal error: stm32f10x_lib.h: No such file or directory
compilation terminated.
Error Code: 0x1

I have selected the STM32F103VGT6_CircleOS_EVO in the Advanced ARM option under the Project Properties.

Kindly assist.
Also can some one give me the links of all the Tutorials applicable for evoprimer.

Rgds,
Softy

VincentC · 2012-12-11 09:32:01

Hi,

Indeed this project was not updated to be compatible with some updates of the ST lib and CircleOS. So there would be some tuning to do for using it in the latest Ride. We'll do it but it will take a little time. Also, it is designed for the Primer2 and it takes more than just changing the target CPU to port it to OP4.

In any case, the important thing in this zip is the pdf tutorial, not the example project. I suggest you follow the pdf tutorial, which should allow you to recreate this project using the current Ride/CircleOS, and for your own board, not another one.

If you prefer a ready made project than a tutorial, choose one of the recent project, designed specially for the OP4, in the Resources section.

Best Regards,

Vincent

softy · 2012-12-11 10:34:28

Hi Vincent,
Yes I am using the code from the Cubic project in the separate project I have created for the evo primer.
Thanks for suggesting the the pdf tutorial .
Rgds,
Softy.

Last edited by softy (2012-12-11 10:34:39)

Etienne.C · 2012-12-11 17:13:59

Hi Softy,

The cubic project has been modified today.
You shouldn't have problems to build it. For the moment, you can run it only on a primer2.

Regards,

Etienne

# 1 2012-12-10 12:00:39 Tutorial (Cubic) 1.1 not compiling!

Tutorial (Cubic) 1.1 not compiling!

# 2 2012-12-11 09:32:01 Tutorial (Cubic) 1.1 not compiling!

Re: Tutorial (Cubic) 1.1 not compiling!

# 3 2012-12-11 10:34:28 Tutorial (Cubic) 1.1 not compiling!

Re: Tutorial (Cubic) 1.1 not compiling!

# 4 2012-12-11 17:13:59 Tutorial (Cubic) 1.1 not compiling!

Re: Tutorial (Cubic) 1.1 not compiling!

Board footer